Double Wall Panel Extrusion Machine
Product Introduction
The JQT double light partition wall panel extruder can produce two light partition wall panels with a span of 600mm at the same time, which improves the production efficiency and the utilization rate of the site.
Working principle
This machine integrates the multi-processes of cloth, vibration, forming and demoulding produced by
lightweight partition board: the main motor transmits the power to the reduction box through the pulley,
and the output shaft of the reduction box drives the spiral stirring knife in the frame (wall Plate), vibrator
and pedestal constitute the forming cavity to rotate; the light mixture from the hopper is continuously
conveyed to the forming cavity, and the light mixture is squeezed by the spiral stirring knife in the forming
cavity and the vibrator is continuous Under the dual action of vibrating, it produces resonance and is
continuously squeezed and compacted, and reaches the required shape, size and compactness. At the
same time, the vibrated and compacted strip produces a reaction force against the rotating stirring knife,
pushing the extruder continuously Advance to achieve continuous plate making.
Parameters
| Model | Board specification | Speed | Power(kw) | Dimension | Weight |
| Double panel | H(mm) | W(mm) | No. of hole | Dia of hole(mm) | (m/min) | Motor | Vibrator | L*W*H(cm) | kg |
| JQT9x29.5 | 90 | 295 | 6 | Φ58 | 0.8-2.5 | 5.5 | 0.8 | 270x97.5x72.5 | 1050 |
| JQT9x(20+30) | 90 | 200+300 | 5 | Φ58 | 0.8-2.5 | 5.5 | 4 | 24.6x87x98 | 1100 |
| JQT9x50 | 90 | 500 | 12 | 10-Φ58 2-Φ30 | 0.8-2.5 | 5.5x2 | 4x2 | 270x140x72.5 | 1600 |
| JQT9x60 | 90 | 600 | 14 | Φ58 | 0.8-2.5 | 5.5x2 | 4x2 | 270x150x72.5 | 1800 |
| JQT10x29 | 100 | 290 | 6 | Φ40 | 0.8-2.5 | 5.5 | 0.8 | 270x97.5x72.5 | 1050 |
| JQT20x25 | 200 | 250 | 8 | Φ64 | 0.8-2.5 | 11 | 4 | 282x57.5x80 | 1050 |
Main characteristic
1. One machine with double panels improves production efficiency.
2. The board density is uniform, which changes the situation that the board at the boundary between
the left-handed and right-handed knives has low strength and is easy to crack from there after assembly.
3. High mechanical degree; full hydraulic lifting. Saving raw materials: Broken steel wires can be manually
connected and used; the produced slats can be produced to reach the end reinforcement, so that there
is no waste of steel and mixed materials at the end of the pedestal, and the utilization rate of the pedestal is improved.
4. Channel steel track can be omitted, saving the cost of making the pedestal, reducing the difficulty of
production, and improving the precision of production.
5. Long service life, the main wearing parts can be more than 80,000 meters, the vibration plate can be
more than 100,000 meters, and the side wall board can be more than 60,000 meters.
Product Tags:
|
|
380V 50Hz 2.5m/Min Double Wall Panel Extruder With 58mm Hole Images
|
